The fans we design cover every possible range of flow and pressure and are customized for each client, ensuring always the maximum efficiency and performance. Each fan is designed for a specific application which allows us to comply with all the regulations and standards required by a particular sector and a determinate client.
The experience obtained along our more than 40 years of history has provided us with a very solid background in almost all the applications in which centrifugal fans are required. Our fans are always designed to ensure that they will require the minimum and easiest maintenance.
High Pressure Blower
Blower Type
Centrifugal Blower
Material
SS/Carbon Steel/FRP
Power Source
Electric Motor
Brand
United Star Metal Works Dubai
Color
As Per Customer Requirement
Warranty
1 YEAR
Country of Origin
United Arab Emirates
Pressure blowers are ideal for applications requiring high pressures at relatively low volumes of air. Pressure blower performance will remain stable through the operating range and can be turned down to zero flow via a discharge damper.
Medium Pressure Blower has been created to obtain the lowest noise thank to the aerodynamic profile of the inlet cone and of the static and dynamic balancing of the impeller. Suitable for the exhaust of clean or slightly dusty air for the various application of the ventilation.
The high volume low pressure blower fan does not pressurize or sustain a given pressure within a closed or sealed environment. These blowers are designed to pull in or push out large volumes of air which are rated in CFM’s or cubic feet per minute. Volume blowers are designed to function within a low static pressure environment, and will not perform well in medium to high static locations. Applications for these blower fans include forced cooling of AC and DC motors, electrical cabinet ventilation, plastics process cooling, ink drying in printing rooms, general combustion air, removal of welding smoke and fumes.
The fans are for supplying pressurized air that required to system or boilers, we called them as Forced Draft Fans or multi-purpose centrifugal fans. When it is in balanced ventilation, the forced draft fan must overcome all resistance from the entrance of air duct to the furnace. It includes the resistance of air preheater, air supply duct, grate and fuel layer. During positive pressure ventilation, forced draft fan (FD) overcome all the resistance of smoke and air duct from the entrance of the air dust. This includes all flue resistance of air preheater, air supply duct, grate, fuel layer and chimney exit.
Our large industrial fans achieve volumetric flow rate of up to 1,000,000 m³/h and pressures of up to 75,000 Pa and the standard version is designed for temperatures of 20°C to +750°C. Depending on the application, we produce customer-specific centrifugal and axial fans and our experienced ventilation technology experts give you personal advice and support.
Kichen Exhaust Blower draws the air into the hood, through the grease duct, through the air purifier (if present), and discharges the air out of the building to the outdoors. Kitchen Exhaust is always discharged outdoors; it is never recycled back into the building.
In properly configured Kitchen Exhaust applications the exhaust fan is always placed downstream from the hood, precipitator, and the odor module. Configuring the system this way creates negative pressure inside the purification equipment and prevents polluted air from escaping through cabinet penetrations (access doors etc.). It also prevents the fan from loading with particulate.
United Star Metal Works offers a wide selection of acid-resistant blowers made from either PVC, polypropylene or fiberglass reinforced plastic (FRP). Available three-phase operation, these blowers are generally intended for high salt environments in coastal areas or for labs where highly corrosive airstreams are present. Acidic exhausts will break down epoxy coated steel blowers over time, and you may find yourself replacing a blower in just months. Acid-resistant blowers, however, will withstand much higher concentrations of acidity and will last.
We also fabricate acid-resistant blower for those in need of explosion/spark resistant capabilities. You would get a blower that was equipped with a totally enclosed and fan-cooled motor to eliminate the chance of any explosive exhaust coming into contact with the spark of the motor.
All of our acid-resistant blowers are made to order and custom fabricated. We do not deal in off the shelf products. We want to make certain that the blowers are made to fit your volume and pressure requirements.
Type of blower fans
Heavy Duty Industrial acid fume extract blower
Application
Chemical
Capacity
500 CMH TO 300000 CMH
Pressure
Medium Pressure
Diameter
300 mm to 2500 mm
RPM
960 -1440
Frequency
50 Hz./60 Hz.
Voltage
415/380
Phase
3 phase
Noise
80 dB to 90 dB
Type of drive
Direct/V-belt/Coupling/Plug type/Engine driven
Surface Treatment
PP+FRP AND Impeller MS+ Rubber lined
Blade Material
Rubber Coated
Type of mounting
Floor mounted/ Flange Mounted
Temperature
40 ⁰C to 150 ⁰C
Country of Origin
Made in U.A.E
Flange Mounted Blower
Blower Type
Centrifugal Blower
Material
FRP
Power Source
Electric Motor
Brand
United Star Metal Works Dubai
Color
As Per Customer Requirement
Warranty
1 YEAR
Country of Origin
United Arab Emirates
Flange-mounted blowers by United Star Dubai save time and space in critical dust-control applications. By placing the blower immediately on top of the dust control apparatus, structural bracing and platforms are eliminated. Also gone is extra connection ductwork, flex connections, elbows and the leaks and maintenance associated with them, as well as the additional duct friction and power consumption they cause. Easy to install, these compact blower assemblies can save you and your customer time, space, and energy.
Body Material
SS/MS/MS+FRP
Blower Type
CENTRIFUGAL
Usage/Application
INDUSTRIAL/COMMERCIAL
Fan Type
ROTARY
Phase
3 Phase
Model Name/Number
UNITED
Motor Rating
2 to 12 HP
Power Source
Electric Motor
Blade Material
As per customer
Electric Current Type
AC
Color
AS PER CUSTOMER
Certification
ISO 9001:2015
Brand
United Star Metal Works
Pressure
HP/LP/MP
Country of Origin
Made in UAE
Heavy Duty V-Belt Drive Centrifugal Blower
Blower Type
Centrifugal Blower
Material
FRP
Power Source
Electric Motor
Brand
United Star Metal Works Dubai
Color
As Per Customer Requirement
Warranty
1 YEAR
Country of Origin
United Arab Emirates
Belt drive fans have a v-belt connecting the motor to move the fan. Fan arrangements that use or allow a v-belt have some important benefits. These include speed variation and a buffer between the motor and the fan to absorb some of the wear and tear.
DIDW is double inlet double width. It has suction on both sides, it is two centrifugal impellers welded together as one. DIDW require bigger casings and the width of the casing is double of that of the casing to be used for a blower corresponding to one of the impeller.
